← Products

Tool engineering system

PolyIQTooling

From a customer STEP, STL, or print to a DFM report and a verified concept tool package: parting, actions, cavitation, gating, cooling, and ejection, checked before anyone cuts steel.

Send us a part

The desktop app is in pilot. Today you can also send a part and get the report and concept back as a service.

Engine output for the hot runner cap showcase: 4 cavities, PP, valve-gated 4-drop manifold. Checked for interference, release and opening/ejection kinematics. Concept tooling, not a released design; hot-runner parts are generic provisional envelopes.

DFM review before tooling

A numbered review of the part as received: CAD quality, walls, draft, undercuts, corners, holes, bosses, filling and ejection. Every finding has a severity, an owner and a recommended action, found before steel is discussed.

Actions verified through their stroke

Angle-pin slides, lifters, hydraulic core pulls, unscrewing and collapsible cores, picked feature by feature. Each one is swept through its stroke and checked for interference.

Complete tool concept

Cavitation, base, gating and runner, cooling and ejection, on a catalog base or a built-up one. Change the cavity count and the base is re-sized to fit.

Source label on every value

Each value in the report, BOM and quote is labeled as formula, guideline, shop standard, supplier data or validated. Supplier-dependent values stay marked until the supplier's data is in.

Press fit and BOM

Clamp tonnage, shot size and stack height against your own presses, and a bill of materials with catalog items and page references where catalog data is loaded.

Connected to production

Send a checked concept to CRM and Process as the part, the mold and a project. Measured trial results come back to the job as validated.

Source labels on every value

A concept is only as good as its inputs, so each value in the report, BOM and quote carries a short label. Anything not marked V is provisional until someone checks it.

PolyIQPolyIQPolyIQ Tooling never marks a concept as released for manufacture. A tool engineer does that.

FFormula
Calculated from stated inputs, such as clamp tonnage from projected area. Check the inputs.
GGuideline
A rule of thumb, such as a draft or rib ratio. Good for judging feasibility, not for cutting steel.
SSupplier data needed
Unknown until the supplier or customer documents it: resin data, hot-runner sizes, a price.
STDYour shop standard
Taken from your company's tooling standards, in place of the generic guideline.
VValidated
Measured, tested or documented on this project. Nothing becomes V by being copied into CAD.

What Tooling covers

Part

DFM review document
A controlled PDF with a document number and issue, a disposition, the findings register, and section views through each undercut and thick spot. It records the exact file that was reviewed.
Part changes before tooling
Recommended DFM edits you approve one by one. The revised part is kept beside the original, with the volume change shown.
From print to part
No CAD? Start from a drawing, sketch or sample photo. The app builds a part and measures the result against the print.
Overmolding
Two-station insert overmold: a rigid substrate, then TPE over it, checked for shut-off along the TPE edge and datum location.

Actions and ejection

Side actions
Angle-pin slides, lifters for internal undercuts, and hydraulic core pulls with sequencing and interlocks.
Internal threads
Rack-and-pinion unscrewing cores and collapsible cores, sized from leading component suppliers' published limits.
Ejection chosen by feature
Pins around the part's features, sleeves on bosses, blades on thin ribs, air poppets, stripper rings, and full stripper plates for thin-wall cups and tubs.

Feed and cooling

Gating and runners
Pick the gate on the part. Cold runners with edge or tunnel gates, 3-plate pinpoint gating, hot sprues, and multi-drop hot runners with valve gates.
Hot runner layout
Balanced H-pattern manifolds, thermal growth and nozzle length checks by nozzle type, added stack height and insulator sheets, with supplier components named on the BOM.
Cooling
Water lines and baffles routed clear of every bore, with steel clearance checked to pins and bores.
Fill, cycle and vents
An early screen for fill pressure, hesitation, weld lines and cycle time, with vents placed at the end of fill. A provisional read for review.

Checks and hand-off

Automated verification
Interference, swept release for every action, opening and ejection kinematics, thread and collapse sweeps, cooling clearance, and base fit.
Quote and team review
Tool cost and piece-price estimate in a quote pack. Reports go to your company account for revisions, review and sign-off, without the CAD.

Your standards, your catalogs, your suppliers

Generic guidelines are only the starting point. Set how your shop builds tools once, and every concept follows it, with each value labeled by source.

Your tooling standards

Write your design rules once in PolyIQPolyIQPolyIQ, under Tooling › Tooling standards, with revisions. The engine uses them in place of its generic guidelines and labels them as your shop standard. A job that departs from them is flagged.

  • Draft, radii, ribs and bosses
  • Gate types and sizes, runners
  • Ejector pin sizes and density, insert margins
  • Cooling line size and steel-to-water
  • Steel by SPI class, plate stock, mold-base vendor

Your catalogs

Point the app at your own library of vendor catalogs. Every lookup cites the catalog and the page, so a value is read off the page instead of guessed.

  • Bases, insert frames and components from leading suppliers built in
  • Hardware listed with item and catalog page in the BOM
  • Hot runner catalogs: nozzles, bushings, pads
  • No part number unless it comes from a verified catalog row

Your suppliers

Set which brands you buy and which you don't. Your preferences decide what the concept names, and stay in the standard so every job follows them.

  • Preferred and banned brands
  • Mold-base vendor of record
  • Hot runners named to your preferred supplier
  • Supplier-dependent values marked S until their data is in

Deliverables

What comes back

  • DFM review document: disposition, numbered findings with severity and owner, and section views of each undercut
  • Recommended part changes, with the revised part kept beside the original
  • Concept tool package as a STEP assembly
  • Action schedule: slide and core-pull travel, sequence, and interlocks
  • Verification record for interference, release, stroke, and cooling clearance
  • Clamp tonnage and shot-size estimate
  • Drawings, BOM and quote pack, every value labeled by source (see below)

Who uses Tooling

  • Tool builders

    A verified concept to quote and detail from, instead of starting the layout from a blank base.

  • Molders

    An early read on cavitation, actions, and press fit before a program is accepted or a tool is sourced.

  • Product teams

    DFM feedback while the part can still change, and a credible tooling concept for supplier discussions.

  • Legacy parts with no CAD

    Parts that exist only as a sample or a print, rebuilt to geometry and carried through to a tool concept.

The tool in the animation

Four-cavity hot runner cap, valve gated

A flanged polypropylene cap, four up on a standard catalog mold base. The engine added a balanced H-pattern manifold in its own plate in the A stack, the nozzle plate and insulator sheets, seated a valve-gated drop on the top center of each cap, put the valve pins and actuators in the A clamp plate, and staggered the gate sequence. Ejector pins, cooling legs and the opening and ejection strokes come from the same build.

A synthetic showcase part, not customer work. Hot-runner parts are generic provisional envelopes here because no hot-runner catalog was loaded; the hot-runner supplier designs and approves the system. Concept tooling for engineering review, not a released design.

Cavities
4
Valve-gated drops
4
Shot
26.3 cm³
Clamp estimate
≈25 t
Formula, provisional
Interference
None
121 body pairs checked
Release and kinematics
Passed
Opening and ejection swept

Geometry stays with you

In the desktop application, part and tool geometry is processed locally on your workstation, and CAD files are never uploaded. By default, only numerical analysis results leave the machine. Visual review is enabled per project: when it is on, drawings and review images are sent for analysis, and the DFM report records the setting.

Scope, stated plainly

Output is concept tooling for review and sign-off by a tool engineer, not released detail design. Covered: straight pull, angle-pin slides, lifters, hydraulic core pulls, rack-and-pinion unscrewing cores, catalog collapsible cores, stripper rings and full stripper plates, cold runners, 3-plate pinpoint gating, hot runners, built-up custom bases, and two-station TPE insert overmolding. Hot-runner components outside the loaded catalog data are generic envelopes for the supplier to design. Not covered: rotary, index-plate or core-back two-shot tools, gas assist, motor- or gear-driven unscrewing, tapered threads, and non-catalog collapsible cores.

Two ways to use Tooling today.

As a service: send a STEP, STL or print and Brocone, the company behind PolyIQPolyIQPolyIQ, returns the DFM report and concept tool package. As software: the desktop app is in pilot. Ask to join.